How to operate the brick machine?

Brick machine is a common construction machinery, which is widely used in construction sites and brick factories. It can efficiently produce various specifications and shape bricks to improve work efficiency.

The basic steps for operating brick machines usually include the following key links:

1 ‌. Preparation stage: Make sure that the brick machine is placed in a solid place, and uses a bracket or bracelet to be stable to avoid support with tires instead of support. Check whether the clutch, brake, wire rope, etc. are not good in the drum.

2. Material preparation: According to the required brick type, prepare the corresponding materials, which may include cement, sand, water and other additives.

Operation process:

Mix the material according to a certain proportion and gradually add the feed inlet of the brick-making machine.

Push the mixed material to the bottom mold in other ways or other methods.

Opening the vibration system, this helps the material closely compact.

After completing the suppression, the bricks will fall off from the mold.

Safety precautions

When the brick making machine is running, it is strictly forbidden to extend the tool into the drum to avoid accidents.

Avoid passing or staying under the fight, especially when the fighting rises.

During the maintenance, the fight should be fixed and the power should be cut off.

It is strictly forbidden to perform unlicensed operations, leave the job without authorization, and operate equipment without sufficient training.

Subsequent work: After the brick is made, the fighting fight should be fixed and then left to ensure the safety of the equipment.

Through the above steps, brick machines can be effectively operated to produce bricks that meet specifications and quality requirements. Different brick-making machines may have some specific operational details and safety requirements. Therefore, before actual operation, you should read the instructions of the equipment in detail and receive relevant safety training.